Our top priority is customer service
Call for Emergency +1 (204) 809-8667
drain cleaning tools

If you have ever had a clogged drain, you know how frustrating it can be. Trying to figure out what is causing the blockage and how to fix it can seem impossible. But don’t worry – we have enlisted the help of some expert plumbers to give us their secret plumbing tools to unclog drain fast! And at a reasonable cost!!

So whether you have a clogged sink, shower, or toilet, read on for the ten best tips to get your drains flowing again in no time!

Related: How frequently should you unclog your drains?

Drain Augers or Drain Snakes

Manual and automated drain snakes or augers are the two major types of this tool. A manual drain snake is turned on and off by turning the handle, which also turns the spiral head within the drain. You may easily remove soft blockages in this manner. However, the manual drain snake’s drawback is that it can’t clear up stronger, more difficult obstructions.

For this reason, most plumbers will use a motorized auger or drain snake. These can remove considerably bigger and more difficult stones and typically extend around 150 feet. So how does it function? The machine is fed through the drain until it reaches the blockage. The auger then breaks up the obstruction and clears the pipeline.

Plungers

You have probably used a plunger before to unclog a toilet or sink, but did you know that there are different types of plungers? Toilet plungers look slightly different from sink plungers because they have a flange on the bottom that creates a seal around the toilet’s drain hole.

The most common type of plunger is the cup plunger, which has a rubber cup at the bottom that covers the entire drain opening. This type of plunger works best for sink and tub drains. Another variation is the bellows plunger, with a rubber cup at the bottom and a small air chamber above it. This design allows for more suction power, making it ideal for clearing tough clogs.

Hydro Jetting

Hydro jetting is a drain cleaning method that uses high-pressure water to clear blockages and build-up from pipes. Plumbers often use this method to clear sewer lines because it is very effective at breaking up stubborn clogs.

Hydro jetting uses a high-pressure hose to blast water through the pipe. The water pressure is strong enough to break up clogs and flush away any debris. Hydro jetting also removes grease, scale, and other build-ups from pipes.

Chemical Drain Cleaners

One way to unclog a drain is to use a chemical drain cleaner. This product is available in liquid and gel form that you can buy at most hardware stores.

To use a chemical drain cleaner, pour the recommended amount into the drain and let it sit for a specified time. After the time has elapsed, flush the drain with hot water to rinse away the cleaner and any loosened debris.

Caution: Chemical drain cleaners are corrosive and can damage your pipes if used too frequently. Be sure to read the manufacturer’s instructions carefully before use.

Video Inspection Equipment

A video inspection is a drain cleaning method that uses a small camera to inspect the inside of your pipes. This equipment is inserted into the drain through a small access point. The camera transmits a live video feed to a monitor, allowing the plumber to see what is causing the blockage.

A video inspection diagnoses sewer line problems. This method is also helpful in locating lost objects, such as jewelry, that have been flushed down the drain.

Conclusion

If your drains are clogged, there are several ways to clear the blockage. Plumbers typically use drain snakes or hydro jetting to remove stubborn clogs. A plunger or chemical drain cleaner may be all you need for more minor blockages. If you’re unsure what is causing the problem, you can call experts to use a video inspection to diagnose the issue.

Check this out if you want to know what other tools professionals use for drain cleaning: https://trusteyman.com/blog/10-tools-plumbers-use-to-unclog-drains/.

Do you have a clogged drain? Please feel free to contact Furnace Repair Winnipeg. We offer a wide range of drain cleaning services to suit your needs. Our team of certified plumbing experts is here to help!

Tags:
Learning Resources

Latest News

Please take advantage of our blog posts that answer your questions and help you learn about our products and services.
why furnace pressure is negative
Heating

Why Furnace Pressure is Negative?

Furnace pressure refers to the difference between the atmospheric pressure outside and inside the furnace. Negative furnace pressure occurs when the pressure inside the furnace

Read More ↠